Tired of searching for Building Equipment & Supplies? DoMyQuote will relieve you off your stress

Building and construction equipments are used in a wide variety of construction projects. They include machineries such as backhoes, bulldozers, cranes, earth-moving equipment or loaders, pavers as well as tools such as air compressors, air hammers, jack hammers, chippers, elevators or generators

Abrasive Belts 

Abrasive belts consist of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven or other backing.

Abrasive Blast Machines and Sandblasters 
Abrasive blast machines and sandblasters clean and prepare surfaces by directing a stream of abrasive particles against a part or a surface.


Abrasive Discs 
Abrasive discs consist of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven or other backing. They are used for metal removal, surface finishing, sanding, etc.


Abrasive Sheets, Rolls and Hand Pads 
Abrasive sheets, rolls or pads consists of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven, sponge or other backing usually with a die cut square or rectangular shape.


Air Compressors 
Air compressors are machines that compress air to higher than atmospheric pressures for delivery to pneumatic or robotic tools, industrial equipment, or direct-use applications.


Augers 
Augers are large diameter, drill-like devices that are used for drilling holes into the earth, stone and pavement as well as moving grain and water in certain applications

Cleaning Agents and Surface Treatments 
Cleaning agents and surface treatments includes liquid cleaners, degreasers, strippers, passivators, etchants, solutions and additives for cleaning and surface preparation.


Concrete Forms 
Concrete forms are stay-in-place formwork for building energy-efficient, cast-in-place, reinforced-concrete walls. These interlocking modular units are dry-stacked without mortar and then filled with concrete.

Concrete Mixers 
Concrete mixers are used to mix concrete during the processing of water, cement and aggregate media, or during the delivery and final pour preparation

Cutoff Wheels and Abrasive Saw Blades 
Cut-off wheels and abrasive saw blades are used to cut bars, stock, pipes and other materials that are made of metal, concrete, or masonry.


Cutting Tool Inserts 
Cutting tool inserts are replaceable attachments for cutting tools. They typically contain the actual cutting edge.
 

Fall Arrest Systems  . 
Fall arrest systems prevent personnel from falling in construction sites, factories, etc. 

 
Earth Moving and Landscaping Equipment  . 
Earth moving equipment and landscaping equipment is used to prepare construction sites, and to maintain developed property around industrial buildings, office parks, and commercial centers.

Flap Wheels and Specialty Abrasives  . 
Flap wheels and specialty abrasives includes cartridge rolls, cross pads, sleeves, unitized or convolute wheels, interleaved flaps, flap discs and other specialized abrasive products converted from coated or nonwoven abrasives.
 

Grinders and Grinding Machines  . 
Grinders and grinding machines use an abrasive that is bonded to a wheel, belt or disc to remove material and improve surface finish.

Grinding Wheels  . 
Grinding wheels are used for metal removal, dimensioning, and finishing. They consist of an integral shank, pin, shaft, or mandrel that drives a mounted wheel or blades.
 

Hand Tools  . 
Hand tools are manually-operated tools that fit in the hand. 

Heavy Equipment Attachments  . 
Heavy equipment attachments are specialized implements that are attached and used with heavy machinery to perform a job.

Honing, Lapping and Super-finishing Machines  . 
Honing, lapping and super-finishing equipment are used to improve surface finish or geometry to tight tolerances.
 

Industrial Metal Detectors  . 
Industrial metal detectors indicate the presence of metal in nonconductive materials such as textiles, rubber, oils or liquids, plastics, powders, wood products and concrete.
 

Industrial Screwdrivers and Screwfeeders  . 
Industrial screwdrivers and screwfeeders are automated tools that are used to turn screws while providing close control of screw torque. They can be electric or pneumatic and may include features such as torque feedback and controlled stopping.
 

Industrial Workbenches and Industrial Workstations  . 
Industrial workbenches and industrial workstations are locations where personnel perform work.  Products range from economy workbenches to cleanroom and electronic assembly benches.
 

Levels  . 
Levels are mechanical or electronic tools that measure the inclination of a surface relative to the earth's surface.
 

Lubricators and Lubrication Systems  . 
Lubricators and lubrication systems are used to apply controlled or metered amounts of lubricant.
 

Lumber and Sawmill Equipment  . 
Lumber and sawmill equipment is designed for the lumber industry and used in sawmills, timber, and forestry applications.

Paving Machines  . 
Paving machines are used to pave roadways, walkways, or parking areas. 

 Plastic Welders  . 
Plastic welders consist of torches, ultrasonic welding equipment, heat guns, hot rod welders, RF or dielectric welders, and hot plate welders used to join thermoplastic materials.
 

Pneumatic Tools  . 
Pneumatic tools are powered by the flow and pressure of a compressed gas. Typically, these handheld power tools use compressed air or compressed carbon dioxide that is stored in small canisters for portability.

Polishing and Buffing Machines 
Polishers and buffing machines are used to impart a fine low Ra surface finish on the exterior of a part. To improve surface finish, they use use abrasive grain slurries or compounds on buffs, bobs, cloth naps, laps, very fine grit nonwovens, and coated abrasives.
 

Power Tools  . 
Power tools include a wide range of devices for fabrication, assembly, construction, and repair. They are usually motor-driven

Pressure Washers